Thermal
Compound
PREMIUM HIGH-DENSITY THERMAL COMPOUND
QC-WLP-QC-02
|
 |
 |
|
The
high-density, ceramic-based thermal compound specifically designed
for modern high-power Peltier Elements and high-performance heatsinks
or water-cooling solutions.
Made with micronized aluminum oxide, boron nitride and zinc oxide.“Ceramique”
uses a high-density layered composite of five unique shapes of
thermally conductive alumi-num oxide, boron nitride and zinc oxide
sub-micron particles to maximize particle-to-particle contact
area and thermal transfer. |
| |
This
exclusive combination provides performance exceeding most metal
based compounds.
Average particle size: 0.38 microns <0.000015 inch
( 67 particles lined up in a row equal 1/1000th of an inch. ) |
| |
Controlled
triple phase viscosity.
“Ceramique” does not contain any silicone. The suspension
fluid is a proprietary mixture of advanced polysynthetic oils
that provide superior performance and long-term stability.
During the system's initial use, the heat from the Peltier Elements
lowers the viscosity of the compound to enhance the filling of
the microscopic valleys and ensure a minimum bond line between
the heatsink and the Peltier Element core. Then the compound thickens
slightly over the next 100 to 300 hours of use to its final consistency
designed for long-term stability.
(This should not be confused with conventional phase change pads
that are pre-attached to many heat-sinks. Those pads melt each
time they get hot then re-solidify when they cool. The viscosity
changes that Ceramique goes through are much more subtle and ultimately
much more effective.) |
| |
Excellent
Stability.
“Ceramique” is engineered to not separate, run, migrate,
or bleed. |
| |
Electrical
Insulator.
“Ceramique” does not contain any metal or other electrically
conductive materials. It is a pure electrical insulator, neither
electrically conductive nor capacitive. |
| |
Wide
Temperature Limits.
Peak: – 40°C to >180°C
Long-Term: – 40°C to 140°C |
| |
| Easy
Clean Up.
“Ceramique”
can easily be cleaned from Peltier Elements and heatsinks with
isopropyl alcohol or any of the cleaners listed in the product
instructions.
|
| |
Innovative
Dispenser.
The 2.7-gram “Ceramique” is the first product available
in our proprietary thermal compound syringe. Our new syringe is
more compact, easier to handle and dispenses a higher percentage
of its content than standard industrial or medical syringes. The
amount of compound remaining in the syringe is easy to determine
as the rear of the plunger is perfectly flush with the flange
when the syringe is empty. |
| |
| Syringes
with 2 ml, 4 ml, 8 ml, 16 ml also are available |
| |
|
Quantity |
Product
Code |
|
2
ml |
QC
– WLP-CQ-02 |
|
8
ml |
QC
– WLP-CQ-08 |
|
